TI-84 Giving Wrong Trig Answers? Fix Radian/Degree Mode

TI-84 Giving Wrong Trig Answers? Fix Radian/Degree Mode

Quick answer: TI-84 wrong trig answers are almost always caused by the wrong angle mode — radian instead of degree. Press MODE, check the third line, highlight DEGREE, press ENTER, then 2ND → MODE to quit. Re-run sin(30): you should get 0.5, not -0.988.

You type sin(30), expect 0.5, and the calculator spits out -0.9880316241. Your calculator isn’t broken — it’s almost certainly in the wrong angle mode. Here’s how to check, switch, and never get burned by radians vs degrees again.

The 30-Second Fix

  1. Press MODE
  2. Look at the third line: RADIAN and DEGREE — the highlighted one is active
  3. Arrow to the one you want and press ENTER
  4. Press 2ND, then MODE (QUIT) to return to the home screen
  5. Retry your calculation

For most school trig and geometry work, you want DEGREE. For calculus, you usually want RADIAN.

How to Tell Which Mode You’re In

Two quick tests:

Test 1 — the MODE screen: Press MODE. Whichever of RADIAN/DEGREE is highlighted is your current mode.

Test 2 — the sin(30) test: Type sin(30) and press ENTER.

  • Result 0.5 → you’re in Degree mode ✓
  • Result -0.9880316241 → you’re in Radian mode (it computed sin of 30 *radians*)

Why the Answers Look So Wrong

The calculator isn’t malfunctioning — it’s answering a different question than the one you asked.

You typeDegree modeRadian mode
sin(30)0.5 ✓-0.9880316241
cos(60)0.5 ✓-0.9524129804
tan(45)1 ✓1.6197751905
sin(π/2)0.027412133591 ✓

In radian mode, sin(30) means “sine of 30 radians” — a huge angle (about 4.77 full rotations), so -0.988 is the *correct* answer to the *wrong* question.

Radians vs Degrees: When to Use Each

SituationUseWhy
Geometry, trig class, SAT/ACTDegreeProblems are stated in degrees
Calculus (derivatives, integrals of trig)RadianFormulas like d/dx sin(x) = cos(x) only hold in radians
AP Calculus examRadianRequired by the exam
Physics (rotational motion)RadianAngular formulas use radians

Exam tip: Our TI-84 SAT/ACT/AP exam strategy guide covers exactly when to switch modes during each test — worth a read before test day.

The Degree Symbol Trick (°)

Need degrees *once* without changing the mode? Force it with the degree symbol:

  1. Type your number, e.g., 30
  2. Press 2ND, then APPS (ANGLE menu)
  3. Select 1:° and press ENTER
  4. Now type sin(30°) — the calculator treats it as degrees even in Radian mode

This is perfect when you’re mostly in radian mode (calculus) but hit one geometry-style problem. There’s also a radian symbol (2ND → APPS → 3:ʳ) that forces radians in Degree mode.

Sanity-Check Table: Know Your Mode in 10 Seconds

Memorize these four values. Anytime a trig answer looks suspicious, punch one in — if it doesn’t match the Degree column, you’re in Radian mode.

TestDegree modeRadian mode
sin(30)0.5-0.9880316241
cos(60)0.5-0.9524129804
tan(45)11.6197751905
sin(90)10.8939966636

This takes ten seconds and saves you from chasing a “broken calculator” that just needs a mode flip. Make it a habit before every homework set and every exam section.

 Other Reasons for TI-84 Wrong Trig Answers

If the mode is correct but answers still seem off:

  • Parentheses: sin 30 without closing the parenthesis can misbehave in longer expressions — always close with )
  • Inverse trig range: sin⁻¹(2) gives ERR:DOMAIN (no real solution), not a wrong answer — that’s expected
  • Graphing trig functions: a “wrong-looking” sine graph is usually a window issue, not a mode issue — see our graph not showing fix and our graphing common functions guide
  • Mode got reset: a RAM reset restores the default (Radian) mode — if your trig suddenly breaks after a reset, check MODE first. Our reset guide explains which reset types touch your settings

Frequently Asked Questions

Why does my TI-84 say sin(30) = -0.988?

Your calculator is in Radian mode, so it computed sin(30 radians) instead of sin(30°). Press MODE, select DEGREE, press ENTER.

Should I use radian or degree mode?

Degree for geometry/trig class and the SAT/ACT. Radian for calculus and AP Calculus. When in doubt, match whatever unit the problem uses.

How do I switch between radians and degrees on TI-84?

Press MODE, arrow down to the RADIAN/DEGREE line, highlight your choice, press ENTER, then 2ND → MODE to quit.

What does the little ° symbol do?

Typing 30° (via 2ND → APPS → 1:°) forces that angle to be interpreted as degrees regardless of the calculator’s mode setting. Handy for mixed problems.

My trig graph looks wrong — is it the mode?

Possibly, but more often it’s the viewing window. Check MODE first (takes 5 seconds), then verify your Xmin/Xmax window covers the angles you’re plotting.

Why does my calculator keep switching back to radians?

Radian is the factory default. Any RAM reset — or a dead battery long enough to wipe memory — restores it. If it keeps happening, check whether your batteries are dying, since power loss can trigger silent resets.


*Practice on a fresh calculator anytime with our free TI-84 calculator online — no download needed. More fixes in our TI-84 guides hub.*

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *