TI-84 ERR:DIM MISMATCH — How to Fix It (3 Causes & Fixes)
Quick answer: To fix TI-84 ERR DIM MISMATCH, press 2 (Goto) to see the operation, then make both lists the same length or match your matrix sizes. For matrix multiplication, the columns of the first must equal the rows of the second. This TI-84 ERR dim mismatch fix takes under a minute. This is just one of the messages in our full list of all TI-84 error codes, with the cause and fix for each.
Seeing ERR:INVALID DIM instead? That is a different error: it appears when the calculator tries to graph something with mismatched dimensions, usually a leftover statistics plot — see ERR:INVALID DIM fix guide.
ERR:DIM MISMATCH shows up when you do math with lists or matrices whose sizes don’t line up. It’s the calculator’s way of saying “these don’t fit together.”
TI-84 ERR DIM MISMATCH Fix: What It Means
When you add, subtract, or otherwise combine two lists or two matrices, their dimensions must match. If L1 has 8 items and L2 has 5, L1+L2 fails. Same for matrices: you can’t add a 2×3 matrix to a 3×2 matrix.
Cause 1: Lists Have Different Lengths
The most common trigger. You typed something like {1,2,3,4}+{1,2,3} or L1+L2 where the lists differ in length.
Fix: Check both lists’ lengths: press 2ND, STAT (LIST), right arrow to OPS, select 3:dim(, and check dim(L1) and dim(L2). Either trim the longer list or fill in the missing entries so they match.
Cause 2: Matrix Addition With Different Sizes
[A]+[B] fails unless A and B are exactly the same size (same rows AND same columns).
Fix: Check each matrix’s size: press 2ND, x⁻¹ (MATRIX), select the matrix, and look at its dimensions shown at the top of the editor. Resize or rebuild so both match.
Cause 3: Matrix Multiplication Order
For multiplication [A]*[B], the rule is different: the number of COLUMNS in A must equal the number of ROWS in B. A 2×3 times a 3×2 works; a 3×2 times a 2×3 also works — but a 2×3 times a 2×3 fails.
Fix: Check dimensions of both matrices. If the inner dimensions don’t match, you may need to transpose one: use 2ND, x⁻¹, right arrow to MATH, select 2:ᵀ (transpose).
Quick Checklist
- Press 2 (Goto) to see the failed operation
- Check
dim(of each list or the size of each matrix - For +/-: dimensions must be identical
- For matrix ×: columns of first must equal rows of second
- Remember: multiplication is NOT commutative for matrices — order matters
- Re-run the original calculation — if it returns a result instead of ERR:DIM MISMATCH, the fix worked.
Avoid it next time: before reusing lists from an earlier data set, check (or clear) L1–L6 first — stale lists with different lengths are the most common reason this error comes back.
Still seeing an error?
If the dimensions now match but the calculator throws a different message, you are probably facing a different error. ERR:INVALID DIM is usually about graphing with bad plot data — our INVALID DIM guide walks through it. For anything else, browse the TI-84 guides hub to find the guide that matches your exact error message.
Frequently Asked Questions
What does ERR:DIM MISMATCH mean on a TI-84?
You’re combining lists or matrices whose dimensions don’t fit the operation — e.g., adding lists of different lengths or multiplying incompatible matrices.
How do I check a list’s length on TI-84?
Press 2ND, STAT (LIST), go to OPS, select 3:dim(, then type your list name and press ENTER.
How do I check a matrix’s dimensions?
Press 2ND, x⁻¹ (MATRIX), select the matrix name, and press ENTER to open the editor — its size (rows × columns) shows at the top.
What’s the difference between ERR:DIM MISMATCH and ERR:INVALID DIM?
DIM MISMATCH is about combining two things whose sizes don’t fit (list+list, matrix×matrix). INVALID DIM is usually about graphing with bad plot data. Different causes, different fixes.
How do I fix ERR:DIM MISMATCH without retyping my lists?
Open the stat editor (STAT → 1:Edit) and compare the two lists side by side. Check each list’s length with dim( (2nd → LIST → OPS → 3:dim(), then delete the extra entries from the longer list — or type the missing values into the shorter one — until both lists hold the same number of items. Your existing entries stay as they are, and the original calculation will run.
*Practice list and matrix math on our free TI-84 calculator online — no download needed. More fixes in our TI-84 guides hub.*






